- Applicable Industry:
The equipment is mainly used for high-speed drilling on round disk and flange, and can be used for high-speed drilling of internal cooling high speed or external cold drilling of high-speed steel twist drill. The processing is controlled by SIEMENS system, which can realize automation, high precision, multi species and mass production.
2. Feature:
2.1 The main frame of the box type or approximate box type structure, made of high strength welded after thermal aging full (high temperature of 550 DEG C and the insulation is not less than 4 hours) can effectively eliminate the residual stress, so the dynamic and static rigidity is good, high stability, deformation is very small.
2.2 The main drilling spindle adopts 7.5kW strong overload spindle frequency conversion motor drive, low speed torque, heavy load can be carried out, drilling strong and powerful, drilling stability is good.
2.3 The machine adopts two sets of SIEMENS system, and is equipped with the corresponding MAXSINE servo motor and servo driver. It has good compatibility, powerful function and easy operation
2.4 The spindle box is made of TH250 material. High strength, high stability, wearable and difficult to deform. The utility model has the advantages of high rotary precision, high machining precision, simple transmission, no mechanical wear, good vibration absorption, etc.
2.5 The main transmission parts, such as linear ball guide, precision ball screws, etc., are of high installation accuracy. For example, linear guide installation datum, after fastening with 0.04mm feeler gauge inspection, do not insert; the difference between the linear guide 0.05/1000mm; ball screw and linear guide parallelism tolerance 0.03/1000m.
2.6 Hydraulic three claws self centering chuck, automatic clamping round flange, without manual centering, repeated centering, high accuracy, greatly improve the processing efficiency.
- Main Structures
The equipment is composed of main machine, hydraulic three claw self centering chuck, vertical slide plate, drilling power head, hydraulic system, cooling system, chip removing device, lubrication system, electric system, etc.
3.1 Two linear ball guide with high capacity are arranged on the top of the main machine to make the power head move horizontally more accurately, the process stability is better, and the positioning accuracy and the repeatability positioning accuracy are high.
3.2 The hydraulic four claws self centering chuck consists of a contract type power chuck, a slewing support, a rotary oil cylinder, a connecting sleeve, a pull rod, a chuck support seat, etc.. The three groups of claws are evenly distributed in the circumferential direction and are dragged, clamped or loosened by the cylinder. The claw is evenly distributed with a ladder groove and can be adapted to flanges with different diameters. The flange workpiece is clamped by the claw and its center position is determined. The utility model can greatly save the artificial auxiliary time when the flange is clamped and positioned.
3.3 The vertical slider has two high linear ball guides that allow the drilling head to move up and down on the vertical slide. Driven by two AC servo motor + high-precision ball screw pair, so that the spindle moves more accurately, the processing stability is better. Two drilling power head, separate control, non-interference each other.
3.4 Drilling head using JNYO precision spindle (internal cooling), spindle taper BT40, clamping hard alloy internal cooling drilling head, high processing quality, high degree of finish hole.
3.5 The hydraulic station is installed inside the main frame, and the hydraulic station provides power. It is mainly used for rotating and clamping the rotary table, and the cylinder is clamped on the turntable. The electromagnetic valve adopts Atos brand, and the hydraulic oil pump adopts Taiwan Just mark variable vane pump.
3.6 The cooling system is equipped with a high pressure internal cooling pump, which is filtered through a strainer to cool the cooling system. The coolant enters the spindle through the swivel joint at the top of the spindle and cools the tool.
3.7 The chip removing device adopts flat chain type and is arranged inside the main frame. The iron filings and the cooling liquid are all collected into the chip remover, and the iron filings are transported to the debris carriers. The chip removal is very convenient, and the coolant flows back to the cooling water tank through the chip removing device.
3.8 The lubrication system equipped with Japan HERG lubricating system, the timing pump lubricating oil into all parts of the linear guide slider, ball screw nut lubrication, lubrication of the most sufficient and reliable, avoiding the tedious manual operation, improve all parts of life.
3.9 This machine adopts SIEMENS CNC system, and is equipped with the corresponding MAXSINE servo motor and servo driver. It has good compatibility, powerful function and easy operation. The utility model has the advantages of fast operation, high efficiency, convenient storage, call, display, diagnosis, convenient communication and maintenance, and automatic alarm.
Technical Specification:
| |
Model |
TFD300/2 |
TFD400/2 |
| Work bench |
Processing range (mm) |
φ300 |
Φ400 |
| Max processing thickness (mm) |
100 |
| Spindle axis |
Spindle speed (rpm) |
10-3000 |
| Drilling diameter (mm) |
φ35 |
| Spindle motor power (kW) |
7.5 |
| Spindle travel (mm) |
300 |
| Drilling machining precision |
Machining accuracy (mm) |
±0.1 |
| Positioning accuracy (mm) |
±0.06 |
| Motor feeding |
W axel swivel turret motor (kW) |
1.5*2 |
| Y axel motor power (kW) |
1*2 |
| Z axel hydraulic motor power (kW) |
2.2 |
| Cooling pump motor |
Cooling motor power (kW) |
4*2 |
| Operating rate |
W axel Rotation rate (r/min) |
0-8 |
| Y axel feeding speed (mm/min) |
0-8000 |
| Z axel feeding speed (mm/min) |
0-8000 |
| Machine weight |
Machine weight (Kg) |
About 3500 |
About 4500 |
| Overall dimensions |
Overall dimensions (mm) |
2100*900*600 |
2200*000*600 |
Our company:
Our Service
Installation:
The seller shall send one engineer to the buyer's country for installation, commissioning and training. The buyer is responsible to provide all necessary equipments for handling and lifting the machine parts before seller's engineers go to the buyer's plant. In addition, the buyer should provide workers to support in installation activities, under supervision from the seller's engineers.
Commission:
The Supplier should give drawings and other details of material/preparation required for installation of machinery which the buyer has to prepare and keep ready before the machine arrives at the buyer's factory. Installation and commissioning can be finished within 10-15 days for above machine generally.
Training:
Training will include training on computer programming, machine operation and troubleshooting. The training time is at most 5 days for this machine.
The buyer should arrange no less than two people for accepting training. After training, the buyer should sign the "Receiving & Inspection Report" supplied by the seller to demonstrate the successful finish of commissioning and acceptance of the buyer.
Our Company
Factory:
With the development of SUNRISE, now our company has occupied important position in this industry. Due to the orders and sales performance is continuously improving, in order to better development, to meet customer's demand, and to provide customers high-quality equipment with the shortest time, our company have bought the new site, the area about 50,000 square meters, this will make sufficient preparation for development of our company and every customer.
Workshop:
Quality make brand, honesty win market, harmony converge talents, and innovation promote development. Our ability to consistently provide innovative, high quality products that outlast and outperform the competition, is why we are the one of the most successful companies offering the most advanced and productive solutions in the CNC machine industry.
Warehouse:
Manufacturing customer oriented products has always been our supreme concern. We believe that quality is the soul of an enterprise forever. Therefore, we never compromised with the quality of our products. We adopt advanced, scientific modern management ideas and system to realize supervisory control among all aspects of produce, inspection, sale and service etc., which help control quality, increase work efficiency and guarantee products' stability, reliability and precision. Therefore, the enterprise can achieve rapid and sustainable development.
Team:
We are a team of experienced and dynamic professionals who are experts in handling precision work through scientific processes. The professional excellent talents unite a powerful and creative team of design, research and development, which build our solid technical strength and competitiveness. And our company is developing fast and supply specialized service to all customers.
Packing & Delivery
Packing Details : Packing, this model need 1*4HQ;
Delivery Details : 60-90 days after get the first payment.
1. Special logistics packaging
2. Suitable carton size
3. Fasten
4. Professional placement
5. Professional shock
6. Complete package
Our Certifications
SUNRISE is focus on quality and company's image. We win market with good quality and service. The company has already passed International Quality Management System ISO9001:2008 certification for many years and also got the CE certificate, smoothly got the title of High and New Tech Enterprises. And has more than ten own intellectual property rights and patent technology. We have own import and export right. Our products exported to Russia, South Asia, South east Asia, Middle East, South America, Africa, Australia, Eastern Europe etc.
Customer Photo
SUNRISE CNC MACHINE ALL OVER THE WORLD, HAVE EXPORTED MORE THAN 50 COUNTRIES.
Our products exported to Russia, Ukraine, Albania, Romania, Iran, Israel, Jordan, Turkey, Uzbekistan, Egypt, UAE, Saudi Arabia, Lebanon, Mexico, Argentina, Brazil, Morocco, South Africa, Kenya, India, Australia, Indonesia, Vietnam, Sri Lanka, Singapore, Malaysia, Thailand, Myanmar etc.
FAQ
Q: Are you trading company or manufacturer ?
A: We are professional manufactutrer, have in this line about 10 years.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 30-60 days if the goods are not in stock.
Q: What is your terms of payment ?
A: Payment 30% T/T in advance ,70%balance before shippment.
If you have another question, pls feel free to contact us as below:
More information, please contact:
QUALITY MAKE BRAND, HONESTY WIN MARKET !
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}