Tphd12025-2 CNC Gantry Move High-Speed Plates Drilling Machine

• Customization: Available
• Structure: Vertical Drilling Machine
• Layout: Vertical
• Model NO.: TPHD12025-2
• Controlling Mode: CNC
• Number of Shaft: 4
• Hole Diameter: 50-100mm
• Automatic Grade: Automatic
• Precision: High Precision
• Certification: GS, ISO 9001
• Condition: New
• Transport Package: Plywood Case
• Specification: 22X6X3.6m
• Trademark: SUNRISE
• Origin: China
• HS Code: 8459210000
• Production Capacity: 50 Sets/Year

Product Description

Applicable Industry:
Mainly used for drilling tube plate, flange and large plate in petrochemical, boiler, wind power, flange industries and also for connection plates in building, bridge, heat exchange, iron tower industries. Drilling, tapping and light milling for workpieces. The carbide drill can be used for internal cooling high speed drilling, and high speed twist drills can be used to external cooling drilling.

Product feature:
The machine is mainly composed of bed and longitudinal slipway, gantry and horizontal slide table, vertical ram type drilling spindle box, worktable, chip remover, hydraulic system, cooling system, centralized lubrication system, electrical system, pneumatic system and other parts.
1. Heavy-load linear roller guide pairs (HIWIN, Taiwan) are equipped on two sides of the machine bed respectively. The longitudinal movement of the gantry's two sides is driven synchronously via Panasonic AC servo motor and precise ball screw pair of big pitch.
          

1. Two movable slides are equipped on the cross beam of gantry. The sliders are guided by two linear roller guide pairs and driven by AC servo motor and precise balls crew pair of big pitch respectively.

 

1. The slides on the cross beam are equipped with vertical CNC feeding ram-type drilling spindle, which adopts special conversion motor with heavy load for spindles. The motor drives the spindles via synchronous belt, stepless speed regulating, low speed with high torque. The drilling spindles (BT50) adopts Taiwan precision spindles (inner-cooling) with sweep device and disk spring automatic broach mechanism, hydraulic cylinder loosing cutter, very convenient to change shank.

 

1. The hydraulic system solenoid valves adopt ATOS of Italy with stable quality.

                   
5. The gantry adopts steel plate welded structure, through heat aging stress, with stable precision. The machine bed, worktable, vertical slide board, transverse sliding rams are all adopt high quality iron castings.          
6. There are several horizontal T-slots on the worktable, which are used for clamping clamps and tube plate parts.
          

1. It adopts FAGOR8055 CNC systems of Spain, equipped with RS232 interface and LCD screen. Drilling coordinate CAD/CAM direct conversion can be realized. With pre modeling and review function before drilling holes, convenient for operation.

                             


 

1. It is equipped with chain-plate type automatic chip-conveyor and chip collection trolley. The cooling system is equipped with paper filer, high-pressure inner-cooling pump and low-pressure outer-cooling pump, which are used for inner-cooling or outer-cooling of cutter. Coolant can be recycled.

                 
9. The machine X, Y axis guide rails and lead screws are equipped with shields. X axis is equipped with steel plate protection cover, Y axis is equipped with organ type protective cover
10. In order to ensure the reliability of the machine tools, the key parts are imported with high quality, details see the main configuration list.
11. Workpieces positioning alignment and clamping.
For square workpeice to find the reference block is available on a supporting plate of T slot is fixed on the X and Y in two directions, the reference block square workpiece two adjacent tightly on the side of X and Y on the two direction; for aligning circular workpiece from square workpiece, the two adjacent quadrant reference block stick tight in the X and Y two direction. For easy moving heavy workpieces can be placed in any supporting plate T slot on the center position by edge finder in spindle hole in the measured workpiece diameter (or inner diameter) three points, through the computer CNC program the calculation is accurate and rapid. Workpiece clamping is composed by plate, rod, clamping rod and pad etc., easy to use.








Specifications:

Model		TPHD12025-2
Max. workpiece size		12000x2500mm
Max thickness		150mm
Work table	Width of T slot	28/500mm
	Load bearing	3t/
Vertical slide type drill head	Quantity	2
	Main spindle taper hole	BT50
	Max drill diameter	Φ50mm (Carbide drill)
		Φ65mm (HSS drill)
	Main spindle speed	30-2400r/min
	Motor power of spindle	2x37kW
	Spindle stroke (mm)	500
	Distance between spindle lower end to worktable (mm)	900-1400
(X axis) Gantry longitudinal move	Max. stroke	12000mm
	Moving speed of X axis	0-8m/min
	Servo motor power of X axis (kW) / Torque (Nm)	2x5/28.4
	X axis positioning accuracy	0.25mm/full length
(Y axis) Power head transversal move	Max stroke	3000mm
	Moving speed of Y axis	0-8m/min
	Servo motor power of Y axis (kW) / Torque (Nm)	2x3/28.4
	Y axis positioning accuracy	0.1mm/full length
(Z axis) Vertical slider feeding	Stroke of Z axis	500mm
	Feeding speed of Z axis	0-5m/min
	Servo motor power of Z axis (kW) / Torque (Nm)	2x3/28.4
Hydraulic system	Hydraulic pump pressure/flow rate	6.5MPa / 25L/min
	Hydraulic pump motor power	3kW
Pneumatic system	Compressed air pressure	≥1MPa
Scrap cleaner and cooling	Scrap cleaner type	Plate chain type
	Qty. scrap cleaner	1
	Scrap cleaner speed	2m/min
	Motor power of scrap cleaner	1.5kW
	Motor power of inner cooling water pump	2x3kW
	Motor power of Outer  cooling water pump	0.75kW
Automatic lubricating system	Lubrication pressure	2MPa
	Lubrication point oil injecting amount	0.1mL
	Lubrication period	6-10min
Electric system	CNC system	FAGOR8055
	CNC axis NO.	6
Total motor power	kW	About 110
Overall size	LxWxH	About 22X6X3.6m
Weight		About 70t