Applicable Industry:
This is special CNC machine for drilling plates and flanges, mainly used in steel structure, tower, bridge and other industries.
Product Feature:
1. CNC slider and drilling unit head, can control depth of holes, with function of drilling blind hole, reaming, chamfering.
2. Machine is controlled by PLC & servo motor, ensure precision positioning .
3. The machine have 4 work area with individual reference, workpieces can be clamped by hydraulic clamps at any area for drilling.
4. Machine equips with computer for software, it can use Auto CAD drawing directly, it also can process NC file which generated by TEKLA.
5. Scrap cleaner can collect all iron scraps and cutting liquid which is recycling.
6. The key mechanical, hydraulic and electric parts are all famous brands.
7. Optimized integration design for complete machine, no foundation requirements.
Working conditions: |
Working environment: |
Working temperature: |
-10ºC ~ 40ºC |
|
Voltage: |
380V(Or some 420V), 50Hz, 3 Phase |
|
Fluctuation of voltage: |
±5-10% |
Air supply: |
≥0.5 MPa |
Specifications:
Model |
TPD3016 |
Machine type |
Gantry movable single spindle CNC drilling machine |
Max work piece size (L×W) |
3000*1600mm |
Thickness of work piece |
100m If work piece is small size, it can be overlapped and processed at the same time. |
Height from table top to ground |
800mm |
Drill unit type |
sliding table, servo control |
Clamp type |
Hydraulic clamp with 12 clamps |
Drill head quantity |
1 |
Max drill diameter |
Φ50mm |
Power of main motor |
5.5 kW |
Spindle speed |
120~560r/min (frequency control) |
Spindle vertical stoke (Z axis) |
350mm |
Drive mode of gantry longitudinal (X axis) |
Guided by linear rolling guide; driven by AC servo motor and ball screw pairs. |
Servo motor power of X axis |
1.3 kW |
Power head lateral driving type (Y axis) |
Guided by linear rolling guide; driven by AC servo motor and ball screw pairs. |
Servo motor power of Y axis |
1. 3 kW |
Servo motor power of Z axis |
0.85 kW |
Motor power of chip cleaner |
0.4 kW |
Motor power of cooling system |
0.25 kW |
Motor power of Hydraulic station |
2.2 kW |
Clamping type |
Attach Morse 4# quick chuck and 3#, 2# reducing sleeve |
Electric control type |
MISTUBISHI PLC |
CNC axis quantity |
3 |
With function of CAD/CAM automatic generation |
with function of hole site memory (memory hole site if power off suddenly) and drill pause |
Total power |
≈12 kW |
Total weight |
About 6200 |
Overall dimension |
4.5*2.61*2.85 |
Drilling Unit Processing Notes: |
Work piece location: |
Make decision of using half of work platform or the whole according to the size of processing work-pieces. Using the whole platform, the work-piece should be put on the processing position close to the clamping cylinder locating side, step two pedal switches, clamp the work-piece and start processing. Using half of work platform, the work-piece should be put on the front or back processing position close to the clamping cylinder locating side, step the corresponding pedal switch and start processing. |
Rotating speed setting: |
Rolling speed can be set according to diameter of dill and other relevant information. The speed of this machine has been set. There is no need for users to adjust. Users only need to input the diameter of drill bit and it will adjust suitable speed automatically. |
Feeding speed setting: |
Feeding speed can be set according to drilling manual or experiences. The speed of this machine has been set according to the diameter of drill bit. Users can adjust it flexibly according to the actual use. For specific adjustment method, please refer to computer programming instruction. |
Self-running operation: |
When all factors meet the condition which self-running need, the "Ready" indicator light on. Put "start" button, the machine will run automatically and process work-pieces meeting requirement. |
Notice: |
This machine has two platforms. When one is processing, the other can move to the frame head for mounting and dismounting. The clamping and loosing of work-pieces is controlled by pedal switch. It will realize continuous processing, improve efficiency and save time. |
For Russian Customer - In English And Russian Operation Panel And Program
Packaging For Foreign Customers (For One Drilling Machine Need One 20GP Container)
When package the machines , our workers will fasten every parts by steel wire rope, so as to when the machine on road, it will not move, ensure security of cargo.